Pedestal Desk with 3-Drawer Units Example using 2 standard 3-drawer base units

You can create a desk to be made to measure in many sizes with any of the base units as pedestals.
Select your own components from the carcasses page

• Select your left-hand pedestal, with fronts and a top (1)
• Select your right-hand pedestal, with fronts and a top (2)
• Select a top (3) with width of 520mm and length equal to the gap between the pedestals - we will then combine the 3 tops to form a continuous desktop

 

Example using 2 standard 3-drawer base units:

• The height includes a 50mm plinth and sides to the floor, and each pedestal requires 1x140mm and 2x252mm drawer fronts
• Available here with 450mm wide pedestals and 500mm or 600mm gap between the pedestals. (1400mm or 1500mm total width)
• The Unit is supplied with standard 'Meta Box' drawers with Soft-close mechanisms which can be exchanged for Push-to-open. See selection box, below.
• We can also supply these units edged with a 2mm vinyl strip which gives a high quality finish to the MFC. See selection box, below.
• These items can be made in a variety of colours. We have identified the closest matches for most of our door colours to help you in your selection.
• For a detailed carcass specification please see our Carcass Information.